FZ - 7802A 插頭引線彎折試驗機

PLUG BENDING TESTER

UL817、CSA22.2、IEC60884-1、GB2099.1、VDE0620、SAA

本機專門測試插頭引出線及電線之耐折強度。試法是將試料固定在夾具上，并加一定荷重，試驗時夾

具左右擺動，經一定次數后，檢視其斷線率；或至無法通電時，查看其總計擺動次數。本機能自動計

數，試料彎折至斷線無法通電時，并能自動停止操作。

This tester is specialized in testing the flexing endurance between power cord and blades , and is capable of testing the flexiblity resistance of the cord itself . Samples are to be secured in the jaws of the flexing apparatus , and cord is to hang vertically with the weight tied on the lower end of it . The rotating jaws are to be adjusted to rotate to the angle of 90 degree to each side of the centered position . After a certain cycles is reached or untill specimen is broken , detect the breakage ratio or calcuate the total cycles . This machine is able to auto - count and auto - stop during specimen broken .

基本規格: Description:

夾具 Grips

6 組 ( sets )

擺動角度 Flexing angles

單邊 (each side) 45°，60° ，90° 可調 (adjustable)

擺動速度 Flexing speed

5 ~ 60 c.p.m 可調（adjustable）

自動計數器 Auto - counter

1 ~ 999999 次，6 個（sets），分別計數 all independent(separately），數字顯示

荷重 Load

113g、284g、10N、20N 各 6 個

電源 Power Requirements

1∮，AC 220V，50Hz